Kamis, 02 Desember 2021

Ikea Kallax In Living Room

Ikea Kallax In Living Room

Ikea Kallax Hack: Craft Room Storage

Ready-to-assemble (RTA) furniture isn't just inexpensive. It's also super adaptable!

Time

Multiple Days

Complexity

Intermediate

Cost

$101–250

Introduction

Hack the Ikea Kallax shelf to build a worktable with a huge surface, convenient craft storage and easy mobility by sandwiching three small storage units between a base with casters and a plywood top with hardwood edging.

Tools Required

Materials Required

  • (2) - IKEA Kallax Insert with Two Drawers (No. 702.866.50)
  • (3) - IKEA Kallax Shelving Unit (No. 202.794.59)
  • 3" locking swivel casters (4)
  • 3/4" x 1-1/2" birch or maple solid wood - 20'
  • 4' x 8' x 3/4" birch plywood (2)
  • Birch iron-on edge banding - 25'
  • No. 12 x 2" flat-head sheet metal screws (24)
  • Polyurethane
  • Wood glue

Project step-by-step (6)

Step 2

Make the Top and Base

make top and bottom of craft room storage table

Cut hardwood plywood for the top and base and install hardwood edging and iron-on edge banding.

Sign Up For Our Newsletter

Complete DIY projects like a pro! Sign up for our newsletter!

Do It Right, Do It Yourself!

Step 3

Fasten Units to Base

fasten ikea kallax units to base

With the assembled shelves (following the IKEA Kallax instructions), position two Kallax shelving units back to back and fasten them to the base with flat-head sheet metal screws after drilling countersink pilot holes through the Kallax frames. The frames are hollow panels, so be careful not to punch through their thin faces when drilling the countersinks. Make sure the screw heads sit flush.

Step 4

Fasten Top

fasten top to ikea kallax craft table

Install the third Kallax unit across the front of the base, using the same method. Then tip the assembly over onto the top and fasten it as before.

Step 5

Attach Casters

Attach casters to ikea kallax craft table

Install locking swivel casters.

Step 6

Round Edges and Install IKEA Kallax Drawers

Round Edges and install drawers to craft table

Tip the assembly right-side up and round over all the top's sharp edges with a router and a round-over bit. Complete the job by installing IKEA Kallax drawer inserts and applying your favorite finish to the top.

Additional Project Information

There's no shortage of creativity when it comes to new ways to use IKEA products. Here are 12 fantastic IKEA hacks.

Similar Projects

Ikea Kallax In Living Room

Source: https://www.familyhandyman.com/project/ikea-kallax-hack-craft-room-storage/

Show comments
Hide comments
Tidak ada komentar:
Tulis komentar

Must Read

Back to Top
banner